View UX60A-MB-5ST_1333221.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEW
Meet requirements of USB 2.0
UX Series
sFeatures
1. Certified to perform as required in USB 2.0 Standard
Tested and certified by USB Association approved laboratory the connectors will perform at transmission speeds up to 480Mbps.
2. Designed for Low Skew performance
The distance between twisted pairs conductors (i.e., contact nos. 2 and 3) is of equal electrical length, for receptacle and plug, resulting in zero theoretical skew.
3. Controlled Termination of Individual Conductors
The termination part of the contact is firmly attached in the molded insulator body. Hirose's Electric unique design of the metal shield prevents short circuits, allowing the overmold resin to flow in the terminated area. By not using heat shrinkable tubing (or any other additional process), the non-twisted part of the conductors is very short, suppressing any unwanted impedance disturbances in the termination area.
Contact No. 3 Contact No. 2
4. Ease of mating and handling
Thin design of the plug assembly and the overmold section allows use in small spaces. The plug also incorporates a build-in snap-lock feature, providing tactile verification of the full and secure mating of plug and receptacle.
5. Two types of metal shields
Two styles of the receptacle metal shield are available, depending on the customer's PCB design requirement: -Surface Mount Termination -Solder Dip Type
6. Printed Circuit Board placement features
Precise location on the board can be accomplished using receptacle assemblies with or without the positioning boss.
7. Board placement with Automatic Equipment
Receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the soldering process and are supplied on the reels.
8. Environmental considerations
Plating is lead-free in order to protect environment.
9. Support of Non-halogen Cable
Wiring harness can be arranged in non-halogen cable types. Note: Non-halogen items are not covered in the current USB 2.0 Standard.
sApplications
Personal and mobile computer peripheral equipment, data terminals, digital cameras, MP3 players, PDA's, GPS and other devices utilizing standard USB protocols 2002.11
1
sProduct Specifications
Current rating Ratings Voltage rating 5 V AC 1A Operating temperature range -30c to +75c
Item
1.Contact resistance 50 m ohms max. 2.Insulation resistance 100 M ohms min.
Specification
Measured at 100 mA Measured at 100 V DC 100 V AC / one minute
Conditions
3.Dielectric No flashover or insulation breakdown Withstanding Voltage 4.Capacitance 5.Mating/un-mating forces 6.Durability (mating / un-mating) 7.Vibration 2 PF min. Mating : 35N max. Un-mating : 7N min. Contact resistance: 70 m ohms max. Un-mating force: 3N min. No electrical discontinuity of 1 ms or more
Measured at 1000 10Hz between adjacent contacts With corresponding connector.
5000 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Frequency: 50 to 2000 Hz, 15 minutes in each of the 3 axis. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c/ +20c to +35c/ +85c/+20cto +35c Time: 30/ 2 to 3/ 30/ 2 to 3 (Minutes) 10 cycles 168 hours at -10cto +65c and Relative Humidity of 90% to 98% 7 cycles Exposed to 5% salt water solution for 48 hours Soldering temperature: 245c Recommended solder immersion time: 2 to 3 seconds
8.Shock
No electrical discontinuity of 1 ms. min.
9.Shock
No electrical discontinuity of 1 ms. min.
10.Thermal shock
Contact resistance: 70 m ohms max.
11.Humidity 12.Salt Spray 13.Solderability
Insulation resistance: 10 M ohms min. (Dry state) Contact resistance: 70 m ohms max. Wet state, with solder coverage area over 95%
sMaterials
qReceptacles
Part Insulator Contacts Metal shield Pick-and-place flat plate Material Synthetic resin Copper alloy Copper alloy Polyamide Color: Black Contact area: Gold plating Termination area: Tin alloy plating Tin alloy plating --------------Finish Remarks UL94V-0 -------------------------------------------
qPlugs
Part Insulator Contacts Metal shield Over-mold compound (Note 1) Material Synthetic resin Copper alloy Steel PVC Color: Black Contact area: Gold plating Termination area: Tin alloy plating Tin alloy plating Black (Note 2) Finish Remarks UL94V-0 -------------------------------------------
Note 1: The over-mold compound is applied at the time of the termination of the plug with the cable and can not be ordered as a separate part. Note 2: The over-molding and cables can be supplied in a wide range of colors. Please contact your Hirose Electric account representative for details.
2
sOrdering information
qReceptacles
UX 60 A - MB - 5 S T
1 2 3 4 5 6 7
qPlugs
UX 40 A - MB - 5 P
1 2 8 4 5 6
qPlug Harnesses
UX 40 A - MB - 5 P A - 1000 - 1001
1 2 8 4 5 6 9 10 11
1 2 3 4 5 6 7 8 9 10
Series name Contact wiring
UX 60: SMT type 40: Solder wiring type
Receptacle serial indication Connector type Number of contacts Contact type Metal shield termination
A: Without positioning post MB: Mini B type 5 S: Female contact P: Male contact T: SMT type 8: Solder dip type (Dip length 0.8) (Note 1)
Plug serial indication Reverse side connector type Cable length
A: Type supporting thick cable A: Standard A type 1000: 1000 mm (Note 2) (Note 3)
11 Serial number
Note 1: Types with different dip style termination lengths can also be provided. Note 2: Various cable lengths can be provided. Note 3: Detailed specifications of the harness items can be supplied. Please contact your Hirose Electric account representative for details.
3
sReceptacles
qMetal Shield SMT Type With Positioning Post
Part No. UX60-MB-5ST CL No. 240-0001-9
Note : Embossed tape reel packaging(1,000 pieces/reel) Order by the number of reels.
1.6 0.8 0.3 1.6 0.8
BRecommended Board Mounting Pattern
3.5min. 0.8 2.5 2.2 8.4 1.6 1.6 0.8 0.5 0.4 max.
2 3.25
CONTACT No.1
9.9 7.7
CONTACT No.5
Connector outside diameter
0.5
3.95
Dia
9m . 0.
mh
1.25 3.3 6.4 min.
ole
9
No conductive traces
3.5
3.5 7.7min. 8.4
1.2 3.3 6.4 2
0.8 1.2
qMetal Shield SMT Type Without Positioning Post
Part No. UX60A-MB-5ST CL No. 240-0003-4
Note : Embossed tape reel packaging(1,000 pieces/reel) Order by the number of reels.
1.6 0.8 0.3
1.6 0.8
BRecommended Board Mounting Pattern
8.4 1.6 1.6 0.8 2.5 2.2 0.8 0.5
9 9.9
7.65 8.4 9.65
CONTACT No.1
7.7
CONTACT No.5
3.1 6 min.
Connector outside diameter No conductive traces 3.5 min. 7.7min. 8.4
3.95
1.2 3.1 8.4
1.2
4
sReceptacles
qMetal Shield Dip Type With Positioning Post
Part No. UX60-MB-5S8 CL No. 240-0002-1
Note : Embossed tape reel packaging(1,000 pieces/reel) Order by the number of reels.
1.6 0.8 0.3 1.6 0.8
3.5 min. 0.8 0.8(Through hole) 1.7(Through hole)
7.3 0.4max. 1.6 1.6 0.8 0.5
.4 R0 (T hro
h ug
ho
le)
2 3.25
CONTACT No.1
7.7
CONTACT No.5
hol . Dia 9mm . 0
1.25 3.3 6.4min.
e
Connector outside diameter No conductive traces 3.5 7.3 7.7min.
3.95
0.8
9
BRecommended Board Mounting Pattern
3.5 7.3
1.2 3.3 6.4 2
0.8 1.2
BReceptacle - recommended clearance area
When considering the placement of the receptacle assembly areas indicated should be free of any materials or components which may interfere with the free movement of the ground contact.
4.9 1 min. 2.3 mni. 5.6 mni. 1.1 max.
0.35 min. ( 25.4 )
0.5 0.65 mni. ( 1.5 )
BDrawing of Mated Assembly - Shown for Reference
(
2)
5
sPlugs
qAssembly Components
(non-terminated, without overmold)
qConnector Unit
22.7 3 (2.4) (0.75) 1.2 2.4 ( 0.2) ( 0.5) () CONTACT No.1 CONTACT No.5 1.2 2.4 14.4
7.45
Part No. UX40-MB-5P UX40A-MB-5P
CL No. 240-0004-7 240-0005-0
Dimension A 6.2 7.85
Dimension B 6.95 7.85
3
Applicable Cable (Note) O3.5~4.0 O4.1~4.6
Note: Recommended cable diameters. Actual diameters may vary due to manufacturing process variations. Contact Hirose for recommendations when using cables with different diameters than the recommended.
sPlug Harnesses
Part No. UX40-MB-5PA-1000-2003
CL No. 240-2003-5
1000
(30.9 ) ( 6.5 ) ( O3.9 ) ( 9.5 ) ( 55 ) ( 8.2 )
6
(
16.2
B
)
BReceptacles Packaging Specification
qEmbossed Carrier Tape Dimensions
Unreeling direction
1.75
(5.4) (Center of pick-and-place surface) 4
16 1.4
O1
.5
(24) 22.25
11.5
Note: Embossed tape reel packaging(1,000 pieces/reel) Order by the number of reels.
qReel Dimensions
(30.4) ( 24.4)
( 6.3)
( O1
3)
Unreeling direction
(O
38
0)
BRecommended Temperature Profile (Receptacles)
Temperature (c) 250 230 200 170 200c min. max. 80S 17010c 80~110S 230c min. max. 50S
Recommended Conditions Reflow : Solder: Test board: IR Paste, 96.5 Sn/3.0 Ag/0.5 Cu Glass epoxy 35mm35mm0.8 mm thick.
0
(85c) Average slope 2c/sec.
Time (sec.)
7
USA: HIROSE ELECTRIC U.S.A., INC. 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1 805 522 7958 Fax : 1 805 522 3217 http://www.hirose.com
GERMANY: EUROPE BRANCH: HIROSE ELECTRIC GmbH HIROSE ELECTRIC CO., LTD. First Class Building 4F, Beechavenue 46.1119PV Zeppelinstrasse 42 D-73760 Ostfildern Kemnat Phone : 49 711 4560021 Schiphol-Rijk, The Netherlands Fax : 49 711 4560729 Phone : 31 20 6557 460 http://www.hirose.de Fax : 31 20 6557 469 http://hiroseeurope.com CHINA: HIROSE ELECTRIC CO., LTD. 10F,No.06, Shanghai Times Square office Tower, 93. Huai Hai Zhong Road, Luwan Shanghai Phone : 86 21 6391 0011 Fax : 86 21 6391 0101 SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #34-13 International Plaza 079903 Phone : 65 6324 6113 Fax : 65 6324 6123
UNITED KINGDOM: KOREA: HIROSE ELECTRIC UK LTD. HIROSE KOREA CO., LTD. Crownhill Business Centre 22 Vincent Avenue (#2NA311,Shihwa Industrial Complex), Crownhill, Milton Keynes MK8 OAB 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 44 1908 305400 Phone : 82 31 496 7000,7124 Fax : 44 1908 305401 Fax : 82 31 496 7101 http://www.hirose.co.uk http://www.hirose.co.kr HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852 2803 5338 Fax : 852 2591 6560 TAIWAN: HIROSE ELECTRIC CO., LTD. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : 886 2 2557 7351,7352 Fax : 886 2 2552 9851
Crea tiv
to World E inks le eL
(R)
8
The contents of this catalog are current as of data of publication. Contents are subject to change without notice for the purpose of improvements.
s onic ctr
HIROSE ELECTRIC CO., LTD.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

▲Up To Search▲

Price & Availability of UX60A-MB-5ST

	To Download UX60A-MB-5ST Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .